Costs and comparison

How much does paving cost?

Paving in the UK typically costs from £70 to £180 per m², depending on the material, ground preparation, drainage and the size of the area.

Request free quotes
Quick cost overview

What does Paving cost on average?

Most homeowners pay around £70 to £180 per m² for professionally installed paving. Simple concrete slab patios are usually at the lower end, while porcelain paving, natural stone and block paved driveways cost more due to materials, sub-base requirements and installation time.

Paving cost guide 2026 GBP 75 - GBP 150 For one project
Choose with confidence

Factors that affect the price

Size of the paved area

Choice of paving slabs, block paving or natural stone

Ground preparation and sub-base requirements

Drainage and edging details

Average paving cost in the UK

The cost of paving depends on whether you are laying a small patio, replacing a garden path or installing a driveway. As an indicative guide, professionally installed paving usually costs between £70 and £180 per m², including standard labour and materials. More complex projects with excavation, drainage, steps or premium stone can cost more.
  • Basic concrete slab paving: around £70 to £110 per m²
  • Indian sandstone or similar natural stone: around £85 to £145 per m²
  • Porcelain paving: around £100 to £180 per m²
  • Block paving for driveways: around £90 to £160 per m²
  • Small repairs or relaying existing slabs may be priced as a day rate or small project fee

What is usually included in a paving quote?

A typical paving quote covers labour, materials and the preparation needed to create a stable surface. Always check exactly what is included, as the sub-base and waste removal can make a significant difference to the final price.
  • Site assessment and measuring the area
  • Excavation of the existing surface where required
  • Sub-base installation and compaction
  • Sharp sand, mortar or appropriate bedding layer
  • Laying and cutting paving slabs or blocks
  • Jointing, pointing or kiln-dried sand depending on the paving type
  • Edging, haunching or restraints where needed
  • Removal of waste, if included in the quotation

What affects the cost of paving?

The biggest cost drivers are the size of the area, the paving material and the amount of preparation needed. A straightforward square patio on level ground is much cheaper per square metre than a driveway with drainage, curves and heavy excavation.
  • Material choice: porcelain, granite and premium natural stone cost more than standard concrete slabs.
  • Ground condition: uneven, soft or poorly draining ground needs more excavation and a stronger sub-base.
  • Access: limited access can slow down work and make waste removal more expensive.
  • Design complexity: curves, borders, steps and intricate patterns increase cutting and labour time.
  • Drainage: driveways and large patios may need channel drains, soakaways or falls to manage surface water.
  • Project size: larger jobs often have a lower per-square-metre rate than very small areas, but the total cost is higher.

Patio paving versus driveway paving

Patio paving and driveway paving are priced differently because driveways must withstand vehicle weight. A driveway usually needs deeper excavation, a more robust sub-base and careful drainage. Patio paving can be simpler, although premium slabs and detailed laying patterns can still increase the cost.
  • Patios are often priced based on slab type, finish and layout.
  • Driveways need load-bearing construction and suitable edge restraints.
  • Planning and drainage rules may apply to new or replacement front driveways.
  • A garden path is usually cheaper than a driveway but may cost more per m² if it is very small or awkward.

How to compare paving quotes

When comparing paving quotes, look beyond the headline price. A cheaper quote may exclude waste removal, adequate sub-base depth or jointing materials. Quotery helps you compare local paving and gardening professionals so you can review options for your project.
  • Ask for a clear breakdown of labour, materials and waste disposal.
  • Check the quoted paving material, thickness and finish.
  • Confirm the sub-base depth and preparation method.
  • Ask whether drainage, edging and sealing are included.
  • Make sure the quote reflects access, skips and any removal of old paving.
Detailed guide

Paving costs for patios, paths and driveways

Paving is one of the most popular ways to create a practical outdoor space, whether you want a patio for seating, a garden path or a driveway. In the UK, paving costs vary widely because the finished surface depends on good preparation beneath the slabs or blocks. As a guide, expect to pay from around £70 to £180 per m² for a professionally installed paved area, with the final quote depending on material choice, access, drainage and ground conditions.

Price build-up

Typical installed paving cost

This range covers many standard UK paving projects, including labour and common materials. Basic concrete paving is usually cheaper, while porcelain, natural stone and block paving driveways cost more because of material prices and installation requirements.

per m²
£70 – £180

Costs by item

ItemUnitNotePrice
Concrete slab patio paving per m² Usually one of the most affordable options for simple patios and paths. £70 – £110
Indian sandstone patio paving per m² Natural appearance with costs depending on slab quality, thickness and laying pattern. £85 – £145
Porcelain paving per m² Higher material cost and more careful cutting can increase labour time. £100 – £180
Block paving driveway per m² Requires a robust sub-base, edge restraints and compaction for vehicle use. £90 – £160
Garden path paving per m² Small or curved paths may cost more per m² due to cutting and setup time. £75 – £140
Relaying existing paving slabs per m² Indicative labour-focused cost where existing slabs are reusable and the base needs correction. £45 – £85
Excavation and waste removal per m² Often included in a full quote, but may be listed separately for replacement projects. £20 – £45
Price gauge

Price ranges at a glance

Compare the main guide prices side by side. The bars show how each item sits between lower and higher estimates.

Concrete slab patio paving £70 – £110
per m²
Indian sandstone patio paving £85 – £145
per m²
Porcelain paving £100 – £180
per m²
Block paving driveway £90 – £160
per m²
Garden path paving £75 – £140
per m²
Relaying existing paving slabs £45 – £85
per m²

Example situations

Small concrete slab patio

A 12 m² garden patio on relatively level ground using standard concrete slabs, including basic sub-base preparation and jointing.

£900 – £1.500

Medium porcelain patio

A 25 m² rear patio using porcelain paving, with excavation, compacted sub-base, cutting around edges and waste removal.

£2.800 – £4.700

Block paved driveway

A 40 m² driveway suitable for vehicle use, including excavation, sub-base, edge restraints, sand bed, compaction and block paving.

£3.800 – £6.400

Decision guide

OptionProsConsBest for
Concrete paving slabs Affordable, widely available and suitable for many patios and paths. Less premium appearance than porcelain or natural stone and may weather over time. Budget-conscious patios, utility areas and straightforward garden paths.
Natural stone paving Attractive variation and a traditional finish that suits many gardens. Can vary in thickness and may need more careful laying and sealing depending on the stone. Homeowners wanting a natural patio with character.
Porcelain paving Modern look, low water absorption and a wide choice of finishes. Higher material cost and specialist cutting can increase installation costs. Contemporary patios and low-maintenance outdoor seating areas.
Block paving Durable, repairable and well suited to driveways when installed on the right base. Requires proper edge restraints, compaction and maintenance to reduce weed growth. Driveways, front gardens and hardwearing paths.

Price factors

Paving material

Concrete slabs are usually cheaper than porcelain, granite or premium natural stone. Material thickness, finish and availability also affect the total.

Size of the area

Larger projects cost more overall, although the price per m² can sometimes be lower because setup and delivery costs are spread across a bigger area.

Ground preparation

Poor ground, old concrete, tree roots or uneven levels can increase excavation, sub-base and labour costs.

Access to the site

If materials and waste must be carried through the house, along a narrow side path or up steps, labour time and disposal costs may rise.

Drainage requirements

Falls, channel drains, permeable paving or soakaways can be needed to manage surface water, particularly on driveways or large patios.

Laying pattern and design

Simple square layouts are faster to install than curves, borders, mixed sizes, herringbone patterns or areas with many cuts.

Waste disposal

Removing old paving, soil, hardcore or concrete can add skip hire, grab lorry or disposal charges to the project.

Saving tips

1
Keep the layout simple

Straight edges and rectangular areas reduce cutting time, waste and labour compared with curves or complex patterns.

2
Prepare access before work starts

Clearing side passages, moving pots and removing obstacles can help the team work faster and avoid delays.

3
Compare like-for-like quotes

Make sure each quote includes the same materials, sub-base, waste removal, edging and drainage before choosing.

4
Choose a practical material

A good-quality concrete or sandstone slab can cost less than porcelain while still providing a durable patio when installed correctly.

5
Plan drainage early

Adding drainage after paving has been laid is usually more expensive than including it in the original design.

Frequently asked questions about costs

Answers about Paving

What is the average cost of paving a patio?

A typical patio paving project costs around £70 to £180 per m². For a 20 m² patio, that often means roughly £1,400 to £3,600 depending on materials and preparation.

How much does block paving a driveway cost?

Block paving a driveway commonly costs around £90 to £160 per m². Costs rise if there is significant excavation, drainage work or difficult access.

Is porcelain paving worth the extra cost?

Porcelain paving can be worth considering if you want a modern, low-absorption surface with a consistent finish. It usually costs more to buy and install than basic concrete slabs.

Does paving need a sub-base?

Yes, most paving needs a properly compacted sub-base to reduce movement, sinking and cracking. Driveways normally need a stronger construction than patios because they carry vehicles.

How long does paving take to install?

A small patio may take a few days, while larger patios and driveways can take a week or more. Weather, excavation, drainage and material availability can affect timescales.

Will I need planning permission for paving?

Many rear garden patios do not need planning permission, but front driveways may be subject to drainage rules, especially if surface water could run onto the road. Check local requirements if unsure.

Keep comparing

Request free quotes for Paving

Compare up to 5 gardeners near you. No obligation.

Start request →

No-obligation request

Post your job

Request no-obligation quotes for gardening and outdoor services.

Free and no obligation Sent within a few minutes Up to 5 quotes

We only share your request with suitable professionals.

Frequently asked questions

About Paving

How much does paving cost per square metre in the UK?

Most professional paving projects cost around £70 to £180 per m². Basic concrete slab paving is usually at the lower end, while porcelain, natural stone and driveway block paving typically cost more.

How much does a 20 m² patio cost?

A 20 m² patio often costs around £1,600 to £3,600 depending on the paving material, ground preparation and waste removal. Premium porcelain or natural stone can be towards the higher end.

Is block paving more expensive than slabs?

Block paving is often more expensive than basic concrete slabs because it needs a strong sub-base, edge restraints and careful compaction. It is popular for driveways because it can handle vehicle use when installed correctly.

Do I need drainage for paving?

Many paving projects need suitable falls or drainage to prevent standing water. Driveways and large paved areas may require channel drains, permeable paving or a soakaway depending on the site and local requirements.

Can I reduce the cost by supplying my own paving slabs?

You may be able to supply your own slabs, but check with the installer first. They may need to confirm quality, thickness, suitability and availability, and labour costs will still apply.

More to compare